The compressor can be operated remotely with the LOCAL/REM selector switch on the meter panel. For the remote operation, the following wiring work is required. Before wiring, be sure to turn off the main power and make sure that no electric power is supplied to the compressor.
Swan air compressors TS series are designed to be compact and dedicated, highly durable, imported air end from Europe, fully-sealed motors, modularized air inlet system,user-friendly equipment panel easy to use.
The faults and problems in the air end operation effect on the whole compressor, on energy consumption, main parameters of the compressor, operational temperature etc.
Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.
