Electric wiring and Power Facilities of GRH3 air compressor

Shell Corena S3 R is high quality compressor oil, designed to provide high lubrication of screw type and vane air compressors. This oil is used for advanced additive system that provides superior protection for compressors operating up to 20 bar and 100ºC discharge temperature with up to 6000 hours maintenance cycle .

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operator safety Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen longevity of mạchine as well as compressor components and ensure operator safety , air compressors are very important to maintain regularly and technically .

Air compressor operation requires competence and experiences. The users may get some serious injuries in some cases. For the safety purpose, read the cautions and warning specified in the manual carefully and fully understand them for proper use.

Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.