Technology

Fleetguard Filter

Lọc Fleetguard

Guidelines for inspection of Handsome II

Inspection intervals and inspection items depend on the installation site as well as operating conditions. The table below provides the rough guidlines. Sound operation is expected if the guidelines are followed.
Hanshin air compressor maintenance

Hanshin air compressor maintenance

Công ty TNHH máy và dịch vụ kỹ thuật Minh Phú cung cấp các dịch vụ sửa chữa, bảo dưỡng máy nén khí Hanshin. Cung cấp phụ tùng hao mòn: dầu máy nén khí, lọc tách dầu, lọc dầu, lọc gió, van áp suất... dùng cho máy nén khí Hanshin như : Máy nén khí Piston dòng NH, GH, H, Máy nén khí trục vít dòng GRH2, GRH3, GCH, máy nén khí không dầu AL2 120 ....

Some attentions of desicant air dryer (heatless type) maintenence

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, in fact there are many different problems  such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using  time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended  maintenance   in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operate safely Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen  longevity  of mạchine as well as compress

Desiccants for Absorption air dryer

Activated alumina/Desiccant beads have a white, spherical, non-toxic, odorless, insoluble in water and alcohol. They are able to stand out thermal shock and abrasion with highly mechanical stability and strong absorption (impervious). The particle shape does not expand or crack after absorbing.

Maintenance compressed air system

Tuesday - 01/01/2019 23:09

The maintenance compressed air systems are often specified in the system documentation, provided by the manufacturer. 

bao duong may nen khi hanshin, Maintenance compressed air sytem
Maintenance compressed air sytem

In this artical Minh Phu would like to  introduce some rules of maintenance  according to general regulation.

- Check air filters and pneumatically handling equipment, condensate water discharge and contaminants properly regulated; Adjust the pneumatic lubricator (if used).
- Exxchange to the operator to know about the operation status of the system, does anything unusual happen?
- Check for the leakage in parts and air pipes; Note whether or not the air pipes are kinked or damaged by physical damage.
- Check the abrasion status, dirt in the signaling parts.
- Check the bushings in the cylinder and check the cylinder.

sua chua may nen khi compair, bảo dưỡng máy nén khí,Screw air compressor working principle
Screw air compressor working principle

1.Maintenance plan:

Daily:

-Condensate discharge from the filter if the ambient air is high humidity and the system does not use an automatic discharge. The common rule is that when the compressed air container has a large capacity, it is necessary to install a water separator with an automatic exhaust.

-Cheeck oil level in the lubricator of the compressed air (if available) and check the oil quantity.

Weekly:

- Check the signaling unit  .

- Check pressure gauge of  pressure regulator

- Check the operation of the lubrication unit.

Every 3 months: 

- Checking  the seals whether they are leaking or not. Tighten the  connections,If necessary,

- Replace air pipes connecting to moving units.

- Check the leakage of discharge  air outlet

- Clean filters.Use soapy water to clean (do not use solvents), then use compressed air to dry (blow in the opposite direction to the working air flow).

Every 6 months:

- Check the erosion of connecting rod in the cylinder and replace if necessary.

- Replace O-ring and Craper ring.

See more  : Shell Corena S3R air compressor oil, Why musst compressed air be concerned. 

Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service. Maintenance compressed air system, maintenance  air compressor,

Total notes of this article: 0 in 0 rating

Click on stars to rate this article