- » Maintenance - Repair of screw air compressors
- » Repair of Piston air compressors
- » Repair of air dryers
- » Replacement of compressed air filter elements
- » Lease of air compressors
- » Repair of chillers
- » Maintenance - Repair of Vacuum Pump
- » Maintenance - Repair of air blowers
- » Knowledge of lube oil for air compressors
- » Design - Execution - Installation of compressed air system
Micom time setting and troubleshooting of the GRH3 air compressor
Micom time setting GRH3 air compressor
When the compressor is released, the time is set on Micom, based on the standard time of the Republic of Korea. Since schedule operation starts in the pre-defined time, make sure to set the time accurately. A user does not have to re-set the time except a special case and if the time should be inevitably re-set, set the time according to the following steps.
Place the cursor on [PARAMETER] and press [ENT] button.
Place the cursor on SET CLOCK and press [ENT] button.
Place the cursor on an item to change by using [ ], [ ] buttons and press [ENT] button to change time, date and year.
|
Troubleshooting of the GRH3 air compressor
Protective Devices and LCD Message List
1. Protective Devices
The following protective devices are contained to protect the compressor against dangerous situation and the measures should be taken by referring the functions.
63A (pressure switch for internal pressure detection) |
49M1 (Fan motor overload relay) |
Internal pressure(P1) Connection Operation It detects internal pressure and disables the operation in case of 2.0 and lower pressure. Contact point(A/B) |
|
|
|
Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service.

Newer articles
Older articles