Technology

Desiccants for Absorption air dryer

Activated alumina/Desiccant beads have a white, spherical, non-toxic, odorless, insoluble in water and alcohol. They are able to stand out thermal shock and abrasion with highly mechanical stability and strong absorption (impervious). The particle shape does not expand or crack after absorbing.
How to find the causes and repair water chiller

How to find the causes and repair water chiller

In the process of operation and use of air conditioners in general and chillers in particular, there are many incidents that make users face with many difficulties. In this article we provide readers with the most basic knowledge to determine the causes, phenomena and remedies when air conditioning (chiller) is in trouble.To help you deal with problems during the machine operation and use, we would like to introduce some of the following common problems:
Kobelco Genuine Screw Oil

Kobelco Genuine Screw Oil

Kobelco( genuine- screw oil) has googd quality. Although the company declined to disclose the chemical composition. However, after using a lot of positive feedback are received about product quality. Although the company has announced that it is only dedicated to its machine, we have tested it for many different air compressors and have not encountered any other problems such as oil glue, scaling, loss ability of lubrication and cooling...
Air filter elements full of trees of U.S.A

Air filter elements full of trees of U.S.A

Suitable for the drinking water, domestic water, electron, printing and dyeing, textile, environmental protection,etc. industrial water of trade filter and alcohol filter and medicine company filter, not acid-base to filter and the intersection of membrane and former security personnel, RO of reverse osmosis, filter.

How to deal with some problem of desicant air dryer (heatless type)

How to deal with some problem of desicant air dryer (heatless type)

Some attentions of desicant air dryer (heatless type) maintenence

Tuesday - 30/07/2019 05:32

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, in fact there are many different problems  such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using  time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended  maintenance   in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operate safely Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen  longevity  of mạchine as well as compress

  • Pre-filter air compressor

Under normal operating conditions, the pressure drop across the filter indicates when the element needs changing typically 6 pisg or greater. However, inspect the filter element at least avey three months for proper seating and condition of the element. If the element has collapsed or can not be properly seated, replace the element.

  • After-filter air compressor

Under normal operating conditions, the pressure drop across the filter indicates when the element needs changing typically 6 pisg or greater. However, inspect the filter element at least avey three months for proper seating and condition of the element. If the element has collapsed or can not be properly seated, replace the element.
 Attention: The life cycle of filter element depends of the quality of compressed   air. Periodic attention must be paid to proper performance.

  • Control air filter of air compressor.

Control air filter should be inspected periodically and replaced when dirty. Periodic replacement of the element will ensure clean control air for operation of the valves. 

  • Purge flow rate adjustment of air compressor.

The purge flow rate should be checked periodically for proper for proper adjustment. The purge pressure for full load operation should be set at 45 pisg (3.1 parg). The purge calibration graph (Appendix) may be used for purge adjustment when the load is les than capacity.
Attention: Do not operate the dryer with no purge flow. It may damage the dryer and will void the warranty.

  • Solenoid of air compressor.

Inspect solenoid valves periodically for proper operation. The inspection should include monitoring the tower pressure gauge on each tower during the cycle. The back pressure on a regenerating tower should not be greater than 5 pisg. Higher pressure indicates either a malfuntioning valve or a cogged muffler.
Frequent monitoring of the tower pressure gauges in conjuntion with the control will give a good indication of proper operation and can assist with troubleshooting should a problem occur. Failure of a solenoid valve may results from/.

  • Faulty control circuit. Check the electrical system to verify that the solenoid coil is receiving electrical input.
  • A burned out coil. Replace the coil.
  • Clogged solenoid valve. Disassemble.
  • Damaged valve seat. Dissemble and clean.

Desiccant replacement of air compressor.

Remove contaminated desiccant from each vessel thruogh the desiccant”Drain port” located near the bottom of each vessel. Allow adequate space aove the desiccant bed motion and expansion during drying . Change the desiccant periodically for optimum dryer performance. Store any unused desiccant in an airtight container.
Attention: Use only activated alumina in your Desiccant Air Dryer.


Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service.

Total notes of this article: 0 in 0 rating

Click on stars to rate this article