Technology

Swan HTW air compressor

SWAN HTW air compressor series are class II type, class II water cooling, compression efficiency enhancement, solid construction design, safety for use. There are l lubricating spray equipments preventing machines from erosion, minimizing oil loss, dehydration, overload, increasing long-term operation, chilling the cooling water, withstanding high ambient temperatures and reducing working temperature,and extending spanlife of machines.

Dyna air compressor

Máy nén khí trục vít Dyna

Some attentions of desicant air dryer (heatless type) maintenence

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, in fact there are many different problems  such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using  time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended  maintenance   in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operate safely Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen  longevity  of mạchine as well as compress
Air dryers repairs

Air dryers repairs

Atmospheric air always contains moisture: the higher temperature, the higher humidity is typical for the air. However, when compressed air is accumulated moisture, the water is condensing on the internal parts of the equipment and pneumatic systems. It is the case of corrosion and reduce the equipment lifetime. Therefore usually the additional air treatment equipment, like air dryer are used to avoid the accumulation of moisture in the pneumatic system.

Maintenance of Handsome II air compressor

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations.

Some cautions when using GRH3 air compressor

Monday - 29/07/2019 03:34

 1. Installation place and cautions when using GRH3 air compressor

Caution     
The compressor is designed to use indoors. Please avoid installing it outside. 

  • Installing in a place directly exposed to raindrops or underground with hot ambient temperature may cause electric shock, drain or rust.
  • Installing the compressor in a place with vibration may cause bad contact, destruction of air end and piping, so a measure should be taken before the installation.
  • If the compressor is installed in a place with harmful gas, it may cause oxidization of lubricant and corrosion parts.
  • Do not leave any flammable materials around the compressor. Any work causing a fire is also prohibited. Once a flame is moved into the compressor, it may cause damages.
  • Do not install the compressor in a place with 40°…and higher ambient temperature. It may cause a fire or damages on the compressor.

Installion 

  • When installing it in an airtight space, it needs induction and ventilation pipes. And the vent needs a fan to ventilate the space.

2. Cautions for Electric Wiring when using GRH3 air compressor

Wiring of GRH3 air compressor

Wiring should be executed in accordance with the indoor wiring rules of the common industrial technology standard, electric facility standards.  
Wiring should be executed only by a competent electrician.
When wiring on the terminals of the compressor, it should be wired to avoid any bending part while a hole into which wires are penetrated should be protected for the sheath from vibration by using rubber and other materials.




Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service.

Circuit Breaker
Install a circuit breaker suitable for the type on the power lead-in.
Protective Devices
Removing and improving the compressor protective devices or changing the settings may cause an accident. Never attempt to change or alter the settings of protective devices.
Grounding
Connect the grounding to the grounding terminal inside the electric box. The grounding should be type 3 grounding if the voltage is lower than AC400V or special type 3 grounding if the voltage is AC400V and higher.
Caution
Without grounding, it may cause an electric shock accident or failure of the compressor.

Total notes of this article: 0 in 0 rating

Click on stars to rate this article