Hanshin air compressor maintenance

Hanshin air compressor maintenance

Công ty TNHH máy và dịch vụ kỹ thuật Minh Phú cung cấp các dịch vụ sửa chữa, bảo dưỡng máy nén khí Hanshin. Cung cấp phụ tùng hao mòn: dầu máy nén khí, lọc tách dầu, lọc dầu, lọc gió, van áp suất... dùng cho máy nén khí Hanshin như : Máy nén khí Piston dòng NH, GH, H, Máy nén khí trục vít dòng GRH2, GRH3, GCH, máy nén khí không dầu AL2 120 ....
Maintanance of Korean Micos 75  air compressor

Maintanance of Korean Micos 75 air compressor

 Air compressor maintenance is the entire job of cleaning the compressor and replacing consumable parts after a certain running time (3000hr or 6000hr) to keep the performance of the machine in the best state. . Checking the machine parameters must be within the allowable limits. Standard maintenance extends the life of the device and does not interrupt the operation of the machine. Minh Phu Machinery and Egineering Services Co., Ltd specializes in supplying spare parts,repairing and maintaining screw air compressors. Below are some photos of maintenance of Micos 75 Air Compressor - Korean Yujin that Minh Phu carried out.
Maintenance process of air blower

Maintenance process of air blower

Basic steps of air blower repair and maintenane as below:

Swan srew air compresor CS-AD series

Swan screw series CS-AD series air compressors are designed with direct drive , high-performance operation, large air volume, solid mechanical structure design, durability. The control system automatically diagnoses the trouble of achieving perfection and the highest reliability.

Maintenance of Handsome II air compressor

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations.

Specifications of Handsome II air compressor

Thursday - 01/08/2019 00:09

Minh Phu Machinery and engineering Services Co., Ltd specializes in  repair, maintenance and supply of  parts for Handsome II air compressors with high quality, reliability and long-term warranty.



Dryer-intergrated types

Compressor without dryer

HM 37AD-5/6u HM 37AD-5/6u HM37A-5/6u HM37A-
Frequency (Hz) 50/60
Discharge air volume (L/min)-Note 1. 6100 5000 6100 5000
Suction pressure temperature ºC . Atmosphere pressure 2 – 40ºC ( 36-104 ºF)
Discharge gauge pressure  (Mpa {kgf/cm2}. 0,69
Outlet air dew point temperature ºC. 12(54) or lower at discharge pressure.  
Motor specifications
Norminal power (kW). 37,0
Voltage( V) 380 . 415/200 . 220 [400 . 400]
Type 3-phase squirrel-cage induction motor
Number of poles 4P
Protection type Totally enclosed.
Cooling method Air cooling
Starting method Start-delta
Insulation class Class F

Operation mode
Continuous with suction throtting system
Dryer power consumption 1,80/2.14  
Discharge pipe diameter (A) 40
Intial lubricating oil volume (L) 18
Dimension: W X D X H 9(mm) 1550 x 950 x 1550
Weight (kg) 1030 950
Noise level (dB {A} 64

Notes of Handsome II air compressor:


  • Discharge air volume is the value converted from the actual air volume discharged from the outlet to the suction air condition (at 35ºC {95ºF}, 75% RH, atmostpheric pressure 0,1013 Mpa {1,0332 kgf/cm2}).
  •  The discharge pressure gauge indicates the line pressure.
  •  Outlet air dew point is measured at ambient temperature of 35ºC {95ºF} under each discharge gauge pressure.
  • Noise level is measured 1.5 m away from the machine and 1.0 m from the floor level in an anechoic chamber.
  •  The compressed air cannot be used for respiratory equipment from which air is directly aspirated into human bodies.

Consult with us for guarantee performance.Minh Phu provides  maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service.

Total notes of this article: 0 in 0 rating

Click on stars to rate this article