Technology

Some attentions of desicant air dryer (heatless type) maintenence

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, in fact there are many different problems  such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using  time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended  maintenance   in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operate safely Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen  longevity  of mạchine as well as compress
Air dryers repairs

Air dryers repairs

Atmospheric air always contains moisture: the higher temperature, the higher humidity is typical for the air. However, when compressed air is accumulated moisture, the water is condensing on the internal parts of the equipment and pneumatic systems. It is the case of corrosion and reduce the equipment lifetime. Therefore usually the additional air treatment equipment, like air dryer are used to avoid the accumulation of moisture in the pneumatic system.
Valvoline air compressor oil

Valvoline air compressor oil

Valvoline is belonged to Ashland Inc. USA was founded 1866 by Dr. John Ellis to be the first people creating the valve lubricating for system steam engine.

Operation control of GRH3 air compressor

Operation control of GRH3 air compressor

Installation and Piping of GRH3 air compressor

Installation and Piping of GRH3 air compressor

Troubles, cause and troubleshooting of air blower

Monday - 19/08/2019 09:44

Trouble of air blower, Cause of air blower and Troubleshooting of air blower

After using period, some troubles or phenomenons  can be caused which are need to be timely detected and dealt with. 

sửa chữa máy thổi khí, sua chua may thoi khi, bảo dưỡng máy thổi khí, bao duong may thoi khi,Sự cố, nguyên nhân và cách khắc phụ lỗi máy thổi khí,Maintenane and repair air blower
Maintenane and repair air blower

 In order to operators easily use and detect , it’s our pleasure to introduce some common troubles and solutions. 

TROUBLES of air blower

CAUSES of air blower

SOLUTIONS of air blower

The air blower do not turn.

Leakage or clog of a subject.

Clean rotor or equipment.

The belt is losen.

Recelibrate or replace.

The motor do not run.

Check the motor or power.


Leakage of air flow

Leakage on the pipe.

Tighten the connections.

Leakage at the safety valve.

Recelabrate the valve.

The belt is losen

Tighten the belt.

Worn clearance

Re-establish proper clearances

Abnormal sound and noise.

The belt is losen.

Recelibrate.

The oil is insufficient .

Replish the oil

The strange subject in the equipment.

Clean

Knocking

Retime rotors

Gear is damaged.

Replace

Bearing is damaged.

Replace

Safety valve works

Recelibrate.

Leakage of oil.

Over-filled oil.

Reduce oil.

Oil tank or gaskets is damaged.

Replace the damaged parts.

The oil plug or oil gauge is losen.

Tighten.


Minh Phu provides  maintenance and repair services for Kaeser compressors, in addition Minh Phu also provides spare parts for Kaeser air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service.

 

Troubles, cause and troubleshooting of air blower

Total notes of this article: 0 in 0 rating

Click on stars to rate this article