Technology

Maintenance process of air blower

Maintenance process of air blower

Basic steps of air blower repair and maintenane as below:

Fleetguard Filter

Lọc Fleetguard

Thermostats for air compressor

Thermostat for air compressor has function of regulating the flow of oil onto the compressor cooler to ensure that the oil temperature and air end are always stable in the allowable temperature.

Swan TS-V air compressor

Swan TS-V airr compressor series is a series of machines using inverter to reduce power consumption and have outstanding features of the Swan TS series. Based on operating phenomena to optimize operation, ensure maximum air volume and minimum power consumption, average electricity savings at: 15% - 30%. Protection and advanced control system improved reliability of safe and enhanced operating performance; Air compressor starts at zero speed, extending the machine's durability.

Wiring for remote operation of Handsome II air compressor

The compressor can be operated remotely with the LOCAL/REM selector switch on the meter panel. For the remote operation, the following wiring work is required. Before wiring, be sure to turn off the main power and make sure that no electric power is supplied to the compressor.

Compressor equipment diagnostics

Saturday - 22/12/2018 02:40

 The faults and problems in the air end operation effect on the whole compressor, on energy consumption, main parameters of the compressor, operational temperature etc.

bao duong may nen khi hanshin

The lifetime of the air end depends on the operation of the compressor, well-timed maintenance, as well as conditions of the equipment operation (in case of large dust size in the air, we recommend to make equipment maintenance more often than provided by the operational manual). The maintenance periods for the air end repairs are indicated in the operational manual for the equipment.

  Please pay your attention, that repair of the blocked air end and air end which is repaired according to the manual (reached planned working hours) are different.Except changing bearings and air end shaft seal, in case when the air end is blocked, it is necessary to check the rotors for thermal gaps, restore the rotor surface, centering the rotors, restore the housing of the air end. In case of air end without mechanical block just change the bearings and air end shaft seal. That is why diagnostics of the air end so important.

thay bi dau nen may nen khi truc vit

 For prior diagnostics, it is necessary to check the air end for vibration and noise.

In case when the air end is blocked it is necessary to disassembly the air end to make specification of the repairs needed and spare parts or make decision regarding possibility of renovation of the air end.

 We implement the diagnostics of the air screw compressor of the following manufacturers:Abac, Dyna, Kobelco, Fusheng, Hitachi, Hanshin, Micos, Swan, Ingersoll Rand, Boge, Atlas Copco, Sullair, Kaeser,Abac, Airpol, Aerzener, Almig, Alup, Atlas Copco, Atmos, Becker, Boge, Bottarini, Busch, Ceccato, CompАir, Domnick Hunter, Donaldson, Ecoair, Ekomak, Fiac, Fini, Gardner Denver, Hankison, Hydrovane, Remeza etc.

You can contact our company, so we can provide an objective estimation and grant you optimal price for air end repairs.

Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26 or e-mail address:  info.mipuco@gmail.com . Sincerely thank you for your interest and your trust of our service.

Compressor equipment diagnostics, sửa chữa máy nén khí, bao duong may nen khi truc vit,

Total notes of this article: 0 in 0 rating

Click on stars to rate this article