Technology

Guidelines for inspection of Handsome II

Inspection intervals and inspection items depend on the installation site as well as operating conditions. The table below provides the rough guidlines. Sound operation is expected if the guidelines are followed.
Air compressor oil uses

Air compressor oil uses

The movement of screw is pineaple-sharpened, therefore it's nescessary to use lubricating oil with theaim to reduce the corrosion and softly operate. The bearing is completely stay in air end so it is also lubricated with air compressor oil.
Supply Hanshin NXL-3000 oil compressor

Supply Hanshin NXL-3000 oil compressor

Minh Phu Machinery and Technical Services Co., Ltd specializes in providing repair and maintenance services and parts: Oil, Separator, Oil Filter, Air Filter ... for Hanshin compressors.

Micom time setting and troubleshooting of the GRH3 air compressor

Micom time setting and troubleshooting of the GRH3 air compressor
Kobelco air compressor maintenance

Kobelco air compressor maintenance

Minh Phu Machine and Technical Services Co., Ltd specializes in providing consulting, repair and maintenance services of Kobelco Japanese air compressors.Moreover, Minh Phu also provides Kobelco parts: compressor oil, oil separator, oil filter, air filter, bearings, solenoid ...

Failure of Handsome Kobelco screw air compressor

Wednesday - 02/01/2019 03:09

Failure  of Handsome Kobelco screw air compressor 

 

During using time of Handsome Kobeco screw air compressor, sometime we have some problems displayed on the instrument panel . To help you understand the meaning of some of these errors, Minh Phu would like to share the following article:

 

No

Causes

Contact 

 
 
 
1
 
 
 
E01
- Failure of input:
+ Checking the voltage to detect weak phase, phase loss; reverse phase or contact at poor connecting point.
- The engine has abnormal signs.
-  Pressure is wrongly set
- Abnormalities in air end.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Liên hệ với Minh Phú (0919 23 28 26) để được tư vấn sửa chữa và bảo dưỡng.
 
 
2
 
 
E02
- Phase reversal: Change the position of the 2 phases of power source fire into the machine
- The on / off frequency is too continuous
- Filter the wind: Clean the air again
- Set the wrong pressure
 
 
 
 
3
 
 
 
E03
-Failure of power supply for cooler.
+ Check the voltage drop, the phase difference 
- Failure of cooler motor:
+ Check the resisto, if the resistor is lower than  10 (MΩ), contact to contributor. 
 
 
 
 
 
 
4
 
 
 
 
 
 
E04
-  Failure of dryer :
+ Failed power supply for dryer 
+ Failure of motor dryer 
+ High frequence  on and off of dryer: After  at least 3 min operating, you can turn off dryer. And wait for at least 3 min before restarting it. 
-  High ambient temperature: Keep ambient temperature staying  under 40 degree.
-  Air filter is clogged : Clean air filter 
- Cooling system is clogged : Clean it. 
 
 
 
 
 
 
5
 
 
 
 
 
 
E05
- High oil temperature 
- Air filter is c;logged : Clean air filter 
- Cooling system is clogged : Clean oil cooler 
- Keep ambient temperature staying  under 40 degree.
- Clogged oil filter: Replace new one. 
- Temperature valve is broken: Replace it
-Inadequate cooling water or high coolant temperature (for water-cooled air compressors)
 
   6
 
E06
- High temperature of compressed air.
- Oil separator or filter is broken: Replace.
 
7
 
E07
- -Inadequate cooling water or high coolant temperature (for water-cooled air compressors)
- Check pumping and pipes 
8 C01 Overheted oil: See more at E05
9 C02 High temperature of compressed air: See E06

 

Other article : Maintenance of Kobelco air compressors, Kobelco air compressor parts, High temperature  of screw air compressor,

 

During using time of Handsome Kobeco screw air compressor, sometime we have some problems displayed on the instrument panel . To help you understand the meaning of some of these errors, Minh Phu would like to share the following article:

 

No

Causes

Contact 

 
 
 
1
 
 
 
E01
- Failure of input:
+ Checking the voltage to detect weak phase, phase loss; reverse phase or contact at poor connecting point.
- The engine has abnormal signs.
-  Pressure is wrongly set
- Abnormalities in air end.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Liên hệ với Minh Phú (0919 23 28 26) để được tư vấn sửa chữa và bảo dưỡng.
 
 
2
 
 
E02
- Phase reversal: Change the position of the 2 phases of power source fire into the machine
- The on / off frequency is too continuous
- Filter the wind: Clean the air again
- Set the wrong pressure
 
 
 
 
3
 
 
 
E03
-Failure of power supply for cooler.
+ Check the voltage drop, the phase difference 
- Failure of cooler motor:
+ Check the resisto, if the resistor is lower than  10 (MΩ), contact to contributor. 
 
 
 
 
 
 
4
 
 
 
 
 
 
E04
-  Failure of dryer :
+ Failed power supply for dryer 
+ Failure of motor dryer 
+ High frequence  on and off of dryer: After  at least 3 min operating, you can turn off dryer. And wait for at least 3 min before restarting it. 
-  High ambient temperature: Keep ambient temperature staying  under 40 degree.
-  Air filter is clogged : Clean air filter 
- Cooling system is clogged : Clean it. 
 
 
 
 
 
 
5
 
 
 
 
 
 
E05
- High oil temperature 
- Air filter is c;logged : Clean air filter 
- Cooling system is clogged : Clean oil cooler 
- Keep ambient temperature staying  under 40 degree.
- Clogged oil filter: Replace new one. 
- Temperature valve is broken: Replace it
-Inadequate cooling water or high coolant temperature (for water-cooled air compressors)
 
   6
 
E06
- High temperature of compressed air.
- Oil separator or filter is broken: Replace.
 
7
 
E07
- -Inadequate cooling water or high coolant temperature (for water-cooled air compressors)
- Check pumping and pipes 
8 C01 Overheted oil: See more at E05
9 C02 High temperature of compressed air: See E06

 

Other article : Maintenance of Kobelco air compressors, Kobelco air compressor parts, High temperature  of screw air compressor,


Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service. kobelco air compressor equipment control, Error of  Handsome Kobelco screw air compressor

Total notes of this article: 0 in 0 rating

Click on stars to rate this article