Technology

How to maintain air dryer?

26/12/2018

Bảo dưỡng máy sấy khí như thế nào? Kiểm tra xe ống thoát khí, thoát nước hình chữ U có thoát khí nén và nước cứng bình thường không. Hãy dọn dẹp một tháng hơn một lần ống thoát hình chữ U. Kiểm tra xem có bộ phận nối ống nào bị rò rỉ không. Hãy duy trì cách ổn định nhiệt độ bên trong ( dưới 38oC) và nhiệt độ cửa vào khí nén ( dưới 38oC). Đồng thời phải dọn dẹp theo chu kì để bụi, tạp chất không phủ lên tụ điện của bộ làm mát sau và máy sấy khí ( cách khoảng 1-2 tuần)

Schedule Operation of GRH3 air compressor

29/07/2019

Schedule Operation of GRH3 air compressor

Working safely with compressed air tank

02/01/2019

Safely using of compressed air tank is a very important issue, compressed air tank before being used must be tested by KTAT, registered for use following regulations. Users must hand over the managing responsibility the compressed air tank to the equipment manager in writing. Operating of thetanks is only given to people from 18 years old or older, who are physically fit and well-trained. They must be assigned by the employer in writing.

Swan air compressor

20/12/2018

air compressor CS series Horsepower : 15~100 HP Pressure : 8.5~13 kg/cm² output air :1400~10600 l/min

How does compressed air filter work?

24/12/2018

Compressed air filter is a device used in compressed air system, it is responsible for filtering dirt, rust, water, lubricating oil ... To find out the working principle of Compressed Air Filter, What does the effect of filter depends on? Please read the following article:

How does an absorption air dryer work?

Wednesday - 26/12/2018 23:43

In recent years, we have received many questions about absorption air dryer: Working principle of absorption air dryer, how much time do you change grain moisture absorber once? What are the main components of grain moisture absorber for absorption air dryers? What cases are the absorption air dryer used?

Drying by absorption can be a physical or chemical process

nguyen ly lam viec may say khi hap thu,air dryer — air dryer

1.Phisical process:

The drying agent, called a water repellent, absorbs the moisture in the moist air and consists of two drying bottles. The first drying tank contains the drying agent and performs the drying process, while the second drying tank will be regenerated by the absorbing capacity of the drying agent (the impurity) that was used the previous time (figure 1). Drying agents are often selected such as: silicagel SiO2, dew point temperature -500C, regenerative temperature t = 1200C - 1800C.

nguyên lý làm việc của máy sấy khí hấp thụ,air dryer — air dryer

Figure 2 Is the operation cycle of the system. When the first drying vessel II operates, valve 6 opens, the compressed air fro compressor through the drying tank II, through valve 4 and into the control system. The regeneration process is carried out by heated air after passing the first air compressor and heated in the heating unit 2, through valve 7 into the I, through valve 8, then the saturated air will be taken outside. Note: During the regeneration process, depending on the capacity and manufacturer, hot air can be taken directly from the compressor. - Absorption air dryers are widely used in manufacturing factories requiring high air output and no mixing of water such as: electronic components factories, .....

2.Chemical process

Figure 3 Principle of absorption by chemical reaction The device consists of a container, which contains an absorbent (Figure 3), which absorbs by chemical process usually NaCl. Humid air will be introduced from door 1, after passing through absorbent 2, for example NaCl, the amount of water vapor in the air will combine with the absorbent and form droplets that settle down to the bottom of the flask.Then the condensate will betaken outside by valve 5. The dried air will be followed gate 4 to the control system.

Nguyễn Ngọc Phương

Minh Phu (+84 919 232 826) provides maintenance and repair services for air compressors, products: air compressor and spare parts for it, Air compressor oil