Technology

Dyna air compressor

Máy nén khí trục vít Dyna
Maintanance of Korean Micos 75  air compressor

Maintanance of Korean Micos 75 air compressor

 Air compressor maintenance is the entire job of cleaning the compressor and replacing consumable parts after a certain running time (3000hr or 6000hr) to keep the performance of the machine in the best state. . Checking the machine parameters must be within the allowable limits. Standard maintenance extends the life of the device and does not interrupt the operation of the machine. Minh Phu Machinery and Egineering Services Co., Ltd specializes in supplying spare parts,repairing and maintaining screw air compressors. Below are some photos of maintenance of Micos 75 Air Compressor - Korean Yujin that Minh Phu carried out.
Supply Hanshin NXL-3000 oil compressor

Supply Hanshin NXL-3000 oil compressor

Minh Phu Machinery and Technical Services Co., Ltd specializes in providing repair and maintenance services and parts: Oil, Separator, Oil Filter, Air Filter ... for Hanshin compressors.

Installation and Piping of GRH3 air compressor

Installation and Piping of GRH3 air compressor

Wiring for remote operation of Handsome II air compressor

The compressor can be operated remotely with the LOCAL/REM selector switch on the meter panel. For the remote operation, the following wiring work is required. Before wiring, be sure to turn off the main power and make sure that no electric power is supplied to the compressor.

How to read bearing parameters

Wednesday - 02/01/2019 04:02

When using the bearing, we see the parrameter. The information on the bearing is a range of letters and number which shows information of; type of bearing, dimensions, accuracy, and other parameters  etc. So, How to understand the parameters correctly, this articale may be useful: 

vong bi 2,bearing parameters
Bearing

1.According to  TCVN 3776-83 the bearing parameter will be understood as following: 

- Ball bearing is abbriviated by numbers. Two last numbers show the inner diameter from 20 to 495 mm, these number is as 1/5  as the real dimensions. The number has inner diameter from 10 to 20 mm signed 00 (10mm), 01 (12mm), 02 (15mm), 03 (15mm), 03 (17mm).
For example: The number 150212 on the bearing mean: 1 range bearing  (0), outer ring (5), light load (2), width (1), inner diameter 60 mm (12×5).
- Other examples:
thong so vong bi,bearing parameters
bearing parameters

 

vong bi skf 7, bearing parameters
bearing parameters

2. Meaning of load :

- The third number from right to left. 

1 or 7

Very light load 

2

 Light load only

3

Medium load only 

4

Heavy load only

5

Very heavy load only

6

Medium load same as 3 but it's thicker 

8-9

Really load only; 814, 820, 914

 3. Meaning of classification:

 The 4th number from right to left indecates the bearing 0-9.    

0

The 1 layer ball bearing 

1

The 2 layer ball bearing 

2

1 layer short cylindrical roller  bearing 

3

2 layer short cylindrical roller  bearing 

4

1 layer long cylindrical rollerbearing 

5

Twisted cylindrical bearing 

6

Thrust ball bearing 

7

Tapered roller bearing 

8

Not radial thrust ball bearing

9

Cylindrical roller thrust bearings

4. Structural meaning :

 The number from right to left.  

3

1 row  cylindrical roller thrust bearing, burrless inner thrust ring without 

4

The same as 3  with barrier ring

5

1 groove baking in the outter ring 

6

1 basket stoping oil made of steel sheet

9

 1 row short thrust  cylindrical roller bearing, there is a ring thrusting the ballroller. 

 
For example:
  Read the 60304 bearing paramaters.
-          ID 04x5 = 20mm
-          Load: Medium

-          1 layer ball bearing 
-          1 basket stoping oil made of steel sheet
Note : If there is 3 last number , the last number is ID (D<20mm).
        Ex : 678 , d=8mm, light load, thrust ball bearing 

5. Bearing gap:

Centre shaft dimension 

New spherical ball bearing 

New clindrical ball bearing 

Usable ball bearing 

20-30

0.01-0.02

0.03-0.05

0.1

30-50

0.01-0.02

0.05-0.07

0.2

55-80

0.01-0.02

0.06-0.08

0.2

85-120

0.02-0.03

0.08-0.1

0.3

130-150

0.02-0.03

0.10-0.12

0.3

6. Silver gap  :

Diameter of center shaft

Gap between shaft and silver bearing 

     
       

>1000 v/p

 

Standard

Allowance 

Standard

Allowance 

18-30

0.040-0.093

0.1

0.06-0.118

0.12

30-50

0.05-0.112

0.12

0.075-0.142

0.15

50-80

0.065-0.135

0.14

0.095-0.175

0.18

80-120

0.08-0.16

0.16

0.12-0.210

0.22

120-180

0.100-0.195

0.20

0.150-0.250

0.30

180-260

0.120-0.225

0.24

0.180-0.295

0.40

260-360

0.140-0.250

0.26

0.210-0.340

0.5

360-500

0.170-0.305

0.32

0.250-0.400

0.6

                                                                                                                                  Source: Internet


Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service. How to read bearing parametersi, air compressor bearings , bearing paremeters, bearing replecement of air compressor

Total notes of this article: 0 in 0 rating

Click on stars to rate this article