Air compressor oil uses

Air compressor oil uses

The movement of screw is pineaple-sharpened, therefore it's nescessary to use lubricating oil with theaim to reduce the corrosion and softly operate. The bearing is completely stay in air end so it is also lubricated with air compressor oil.
Supplier of Micos air compressor oil

Supplier of Micos air compressor oil

Micos air compressor oil is the screw air compressor oil series with viscosity of VG 32 , good thermal stability that will meet all types of air compressors working in the most harsh temperature conditions, produced by GS Caltex Corp Korea, one of the world's largest industrial oil producers.

Maintenance of Handsome II air compressor

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations.
Kobelco Genuine Screw Oil

Kobelco Genuine Screw Oil

Kobelco( genuine- screw oil) has googd quality. Although the company declined to disclose the chemical composition. However, after using a lot of positive feedback are received about product quality. Although the company has announced that it is only dedicated to its machine, we have tested it for many different air compressors and have not encountered any other problems such as oil glue, scaling, loss ability of lubrication and cooling...
Piston maintenance and repair

Piston maintenance and repair

Piston compressors are widely used in industry (manufacturing factory), with high mobility, simplicity , easy repair, cheap price which are suitable for many objects. Therefore, Piston compressors are widely used in daily life such as: motorbike inflation, car drying , pumping car tires...

Notes when installing air dryer

Wednesday - 26/12/2018 22:39
sua chua va bao duong may say khi hap thu
air dryer


In order to be able to use the air dryer for a long time without being damaged, what should we pay attention to install and design the engine room? ​​​​​​


1.- Must be assembled in a flat place
- Places with many impurities such as acids and alkalis can cause corrosion.
- Must be assembled to avoid windy, insufficient space (if the air is not circulated, the drying efficiency and even the machine life will be reduced). Expand the space to the left, right, front, after about 1m for the inspection, that help protection and maintenance to be done easily.
- The place must be a place with less dust and no vibration.
  * In case of necessity, compressed air must be used to clean the cabinet periodically (about 1 to 2 times/ week).

2.In winter, it may freeze due to the remaining moisture in the machine, so it must be assembled in a place with temperatures above 0 ° C and avoid places with direct light (ambient temperature: from 1, 7oC ~ 40oC)

*Especially if the assembly place is airtight, it must be connected to ventilation, it help to avoid damage to the machine

 3. Do not install the compressor in the downstream of gas and any places at risk of fire. 


The assembly of pipelines must necessarily use raw materials of KS, the assembly as well as repair must be carried out in accordance with the regulations, while connecting the broken parts so that the gas does not leak out.
1. Assemble the pipeline in the direction of compressed air after accurately checking the entrance and exit of the air dryer (if installed reverse, the machine will not be able to absorb moisture, and also cause damage )
2. Water discharged to the outlet must be drained by a separate water system

3. Use the round valve when assembling the pipe so that it is easy to repair the damage to the air dryer. (Use of Radiator) Switching the pipes does not directly affect the air dryer.The support must be assemble separately to avoid the movement of the pipes

4. Make sure the air compressor's vibration not transmitted to the air dryer, the heated air do not blow into the air dryer?
5. Consider the durability like rust to use galvanized system.
Caution: When using air compressor for later stage by oil supply method, if it is cleaned once inside the heat exchanger once a year, the cleaning effect will be very large.

Related articles: How to choose Hanshin gas dryer capacity,

Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service. Installation of air drying system, cautions when installing air dryer, notes when installing air dryer.

Total notes of this article: 0 in 0 rating

Click on stars to rate this article