Technology

Guidelines for inspection of Handsome II

Inspection intervals and inspection items depend on the installation site as well as operating conditions. The table below provides the rough guidlines. Sound operation is expected if the guidelines are followed.

Micom time setting and troubleshooting of the GRH3 air compressor

Micom time setting and troubleshooting of the GRH3 air compressor
Hanshin air compressor maintenance

Hanshin air compressor maintenance

Công ty TNHH máy và dịch vụ kỹ thuật Minh Phú cung cấp các dịch vụ sửa chữa, bảo dưỡng máy nén khí Hanshin. Cung cấp phụ tùng hao mòn: dầu máy nén khí, lọc tách dầu, lọc dầu, lọc gió, van áp suất... dùng cho máy nén khí Hanshin như : Máy nén khí Piston dòng NH, GH, H, Máy nén khí trục vít dòng GRH2, GRH3, GCH, máy nén khí không dầu AL2 120 ....
Air end repairs

Air end repairs

After air end diagnostics, our engineers estimate the necessary repairs and provide calculation of the repairs and necessary spare parts

Some cautions when using GRH3 air compressor

Some cautions when using air compressor. Below are some tips which help to use air compressor durably.

Why must prevent machines from lubricant amulsion ?

Sunday - 23/12/2018 09:35

In the process of using air compressor oil, due to poor preservation process or any causes that makes lubricating oil mixed with water. If the water is not separated, the emulsion will be formed and the water is kept  in the form of emulsion. So, what do  these emulsions affect? Are there any cases that need to create emulsions? ... The following article will help you better understand this problem.

dau goc khoang

 

1.The lubricants are mixed water in many cases due to: 



+ Water in the air is condensed due to compression  ( Azolla ZS hydraulic, diesel)
+ Cortusa, Drosera MS
+ Oil contacts with water vapor  (Steam  tuarpin  – Preslia)
+ Water splashes into  (Carter EP oil )
-> If the water is not completely separated, the emulsion will be created. 

 

2. What do these amulsions affect?

- These amusions cause:
+ Rusty metal parts. 
+ Inceasing oxidation, decreasing lubrication.
+ To turbin oil : condensation creating , clogged pipes, quickly damaged 
silver lining drive and needed lubricating parts( speed reducer) .
+ To hydraulic and pneumatic oil :  Failed the needed lubricatig parts due to the condensation. 
+ To closed-opened gearbox: Life span of mortor is cut down because water  splashes .
 

3. Some cases need emulsion-creating 

- There are some oil needing highly emulsion creating such as: 
+ The lubricants for drills because thay are always contacting water, so the emulsion creating is nescessary to create the oil slick to prevent machine from erosion. 
+ Metalworking fluid (cutting fluid)  must easy-mixed with water to increase cooling capacity of  lubricants and  other additives which is more lubricative.
+ Hydraulic oil mixed with water avoids fire nd exploition when using hydraulic system or high temperature places but also ensure the lubricative capacity. 

Minh Phu provides maintenance and repair services for air compressors, in addition Minh Phu also provides spare parts for air compressors with high quality at reasonable prices. For further information, please contact (+84)919 23 28 26. Sincerely thank you for your interest and your trust of our service.

Why must prevent machines from lubricant amulsion ? , mineral oil

Total notes of this article: 0 in 0 rating

Click on stars to rate this article