Công ty TNHH máy và dịch vụ kỹ thuật Minh Phú cung cấp các dịch vụ sửa chữa, bảo dưỡng máy nén khí Hanshin. Cung cấp phụ tùng hao mòn: dầu máy nén khí, lọc tách dầu, lọc dầu, lọc gió, van áp suất... dùng cho máy nén khí Hanshin như : Máy nén khí Piston dòng NH, GH, H, Máy nén khí trục vít dòng GRH2, GRH3, GCH, máy nén khí không dầu AL2 120 ....
Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.
Atmospheric air always contains moisture: the higher temperature, the higher humidity is typical for the air. However, when compressed air is accumulated moisture, the water is condensing on the internal parts of the equipment and pneumatic systems. It is the case of corrosion and reduce the equipment lifetime. Therefore usually the additional air treatment equipment, like air dryer are used to avoid the accumulation of moisture in the pneumatic system.
