Atmospheric air always contains moisture: the higher temperature, the higher humidity is typical for the air. However, when compressed air is accumulated moisture, the water is condensing on the internal parts of the equipment and pneumatic systems. It is the case of corrosion and reduce the equipment lifetime. Therefore usually the additional air treatment equipment, like air dryer are used to avoid the accumulation of moisture in the pneumatic system.
The compressor can be operated remotely with the LOCAL/REM selector switch on the meter panel. For the remote operation, the following wiring work is required. Before wiring, be sure to turn off the main power and make sure that no electric power is supplied to the compressor.
Inspection intervals and inspection items depend on the installation site as well as operating conditions. The table below provides the rough guidlines. Sound operation is expected if the guidelines are followed.
Minh Phu machines and technical sevices Company Address: No.24,102/72 Alley, Truong Chinh Street, Phuong Mai Ward, Hanoi
Office: 12C7, Nguyen Cong Thai Street, Dai Kim, Hoang Mai, Hanoi
Hotline: +84 24 6294 8282 - +8491 923 2826
Mã số thuế: 0106411578 (Đăng ký lần đầu: ngày 02/01/2014, thay đổi ngày 23/10/2017)