Technology

Dyna air compressor

Máy nén khí trục vít Dyna

Swan air compressor CS series

The SWAN air compressor CS-1 series are modular in desig reliability, simple maintenance and quiet operation. Using Germany air end and accurate control components, stable quality consistent with the real needs of users.
Process of technical safety audition of pressure

Process of technical safety audition of pressure

The process of technical safety inspection on average is subject to the pressure of QA: 09 - 2014 / BLDTBXH
Kaeser air compressor maintenance -  CSD and CSDX Series

Kaeser air compressor maintenance - CSD and CSDX Series

New CSD screw air compressor meets all customer requirements: high energy efficiency, low noise, very smooth running, easy use and maintenance, providing good quality compressed air. All these advantages are achieved through innovations in airend design, drive systems, cooling and ventilation ...
Air dryers repairs

Air dryers repairs

Atmospheric air always contains moisture: the higher temperature, the higher humidity is typical for the air. However, when compressed air is accumulated moisture, the water is condensing on the internal parts of the equipment and pneumatic systems. It is the case of corrosion and reduce the equipment lifetime. Therefore usually the additional air treatment equipment, like air dryer are used to avoid the accumulation of moisture in the pneumatic system.
GSA desiccant air dryer GSA desiccant air dryer GSA desiccant air dryer
This air dryer uses desiccant to remove water from the compressed air. Normally, water will be absorbed through the desiccant and kept re-dry, then dry gas will be delivered to the production area. The dew point temperature of the air dryer can be from -60oC to -70oC. The deeper the negative, the cooler the compressed air, which also means the drier the compressed air.
MP000085 Absorption air dryer 0 đ

  • GSA desiccant air dryer

  • Post on 26-03-2020 04:12:16 AM - 496 Views
  • Product code: MP000085
  • Price: Contact
  • Status: Còn hàng

Hotline mua hàng

Liên hệ: 024 6294 8282 - 091 923 2826
Thời gian 08h - 17h30 T2 đến T6, Sáng T7 8h - 12h

  • GSA desiccant air dryer
    This air dryer uses desiccant to remove water from the compressed air. Normally, water will be absorbed through the desiccant and kept re-dry, then dry gas will be delivered to the production area. The dew point temperature of the air dryer can be from -60oC to -70oC. The deeper the negative, the cooler the compressed air, which also means the drier the compressed air.


  • Air dryer is an indispensable part of the compressed air system, helping to dry and clean the compressed air before it is put into the duct. Typically, a dryer that filters about 20 liters of air per second delivers about 20 liters of water a day. The cooler (aftercooler) will remove about 15 liters of that amount and more than 7 liters will be removed with the air dryer.
     
    Desiccant air dryers use a desiccant to remove water from the compressed air. Normally, water will be absorbed through the desiccant and kept re-dry, dry gas will be sent to the production area. The dew point temperature of the air dryer can be ranged from -60oC to -70oC. The deeper the negative, the cooler the compressed air, which also means the drier the compressed air.
    GSA desiccant air dryer
    Minh Phu Machinery and Engineering Co., Ltd is a company specializing in providing products and maintenance services for air compressors and dryers with over 20 years of experience. We are confident to bring absolute satisfaction in product and service quality to our valued customers.
    Please contact us immediately via hotline 0919 23 2826 or 024 6294 8282 for the fastest and most timely free consultation!