Air compressor-MP Machinery and engineering service

Established in 1969, Hanshin Air Compressor was a manufacturer of Piston compressors in 1970, The brand manufactured screw air compressors in 1980 and oil-free screw air compressors in 1983. Hanshin was the Company pioneering in the production of air compressors for Korea's nuclear power plant in 1999. In 2001, Hanshin built a factory in China and became the leader in the air compressor industry in Korea. Hanshin has supplied air compressors to more than 20 countries around the world and occupies the largest market share in the air compressor market in Korea. Minh Phu Machinery and Technical Service Co., Ltd specializes in providing repair and maintenance services as well as spare parts: Oil, Oil separator, Oil filter, Air filter, etc. for Hanshin air compressors

Hanshin NXL-3000 Air Compressor Oil has a lifespan of 3000-4000 hours, recommended for use by manufacturer of hanshin oil capable of enhancing lubrication of equipment at low and high temperatures. Replacing the oil according to the manufacturer's recommendations will help reduce risks and increase the life of the air compressor.
Product information

Product name: Hanshin NXL-3000 Air compressor oil  - Brand: Hanshin - Origin: Korea - Life expectancy: 3000- 4000 hours recommended - Availability: Stocks available - Capacity: 20L per bucket - Made in Korea

Uses
- Reduce abrasion and friction.
- Clean and remove dirt from the engine to prevent deposits on the machine surface.
- Fill the slots in the screw shaft to support compression process.
- Act as a cooling solvent for the screw.
- Sealing: the oil goes to the parts of the engine and the compressor head to fill in the space between the plunger and the cylinder, keeping the pressure in the combustion chamber and minimizing the burning gases to the crankcase.
- Neutralize acid in the composition of alkaline lubricants to protect the engine from corrosion caused by acids.

INSTRUCTIONS FOR REPLACING OIL COMPRESSOR
During the use of air compressors, users often have to periodically replace oil for the machine. The oil replacement based on the manufacturer's recommendations is very important, making the machine more durable, reducing many problems and contributing to stabilizing the factory's production process. However, it is very important to change the oil to the compressor correctly to avoid risks such as: Oil splash causing burns, etc.

This article helps customers to have many techniques to replace oil for screw air compressors.
1. Press the STOP button.
2. Turn off the power.
3. Make sure that the pressure in the air compressor drops to the same level as the ambient pressure (check if the pressure scale is 0Mpa).
4. Remove the oil tank side door.
5. Remove the additional oil drain hose on the oil tank
6. Place the oil tray under the oil drain valve. Open the oil drain valve. Let the oil drain from the oil tank completely. Close the valve and re-screw the drain valve.
7. Place the oil tank under the oil cooler removal area. Remove the oil cooler. Let the oil drain out. Reassemble the oil cooler.
8. Open the oil tank cover, pour oil into the tank. Fill the oil tank to the level between 2 red lines.
9. Make sure that the removed devices are reinstalled and tightened, and reattach the door and right panel in the original position.
10. Turn on the power. Press START button and stop it after 7 or 8 seconds after that.
11. Check the oil level on the scale of the oil tank. The oil level will be lower because there is little oil circulating in the pipeline and in the oil cooler.
12. Confirm that the pressure drops to the ambient air pressure level. Then disconnect the power supply and add more lubricating oil to the oil filler port.
13. After adding, cover the oil tank carefully and firmly.
Press the START button again to check the oil level when the compressor is full load.
Attention :
- If the oil is no longer viscous, produces a lot of residue or changes color, you will not be able to restore system functions even though the oil cooler, oil tank and oil pipe are cleaned. You may need to replace the oil cooler and overhaul the entire system (including the compressor head).

Minh Phu Machinery and Technical Service Co., Ltd specilizes in supplying compressor oil of many brands such as Hanshin, Hitachi, Kobelko, IHI, Komatsu, Airman, Volvo, ... prestige. Our company commits to supply genuine products to our customers. Contact the hotline 0919 23 28 26 for the best and fastest support.