Air compressor-MP Machinery and engineering service

Micos Air Compressor Oil with good thermal stability and VG32 viscosity will be suitable for all types of air compressors working in the most extreme temperature conditions. Micos Air Compressor Oil is produced manufactured by GS Caltex Corp Korea, one of the largest industrial oil producers in the world today.
Micos compressor oil is used for Yujin-Micos compressors. With modern blending technology that has been completely tropicalized to suit Vietnamese weather, Micos oil is an ashless oil with special performance for air compressors. Micos oil is designed to meet the toughest requirements of leading air compressor manufacturers

The oil is formulated with high quality mineral oil and high performance additive system to protect the compressor and offers exceptional reliability for operating under mild to harsh conditions.
- Outstanding advantages when using Air Compressor Oil Micos oil
+ Make compressors cleaner and less sediment than conventional mineral oils, helping to extend operation time between maintenance periods.
+ Excellent resistance to oxidation and heat resistance, allowing extended service life while controlling deposit formation. These products also have excellent resistance to wear and corrosion, which enhances the service life and performance of machines.
+ Enhances the performance of the machine, produces less ash and carbon.
+ Reduce sediment in discharge lines.
+ Reduce the possibility of fire and explosion in the exhaust system.
+ Increase the performance of the compressor.
+ Longer life expectancy, excellent thermal and oxidation stability.
+ Lengthen life expectancy of filter life.
+ Lower maintenance costs.
+ Reduce wear and tear of silver rings, cylinders, bearings and gears, high load capacity.
+ Less sediment phenomenon below the device, excellent water separation ability.
+ Reduce the formation of deposits in crankshaft boxes and discharge lines.
+ Reduce device clogging due to agglutination.
+ Less likely to form emulsions.
+ Effective protection of valves and reduce wear of belts and cylinders.
+ Prevent rust and corrosion effectively.

Applications of Micos oil
Micos oil compressor is recommended for one-stage and multi-stage compressors. They are especially effective for compressors operating continuously at high temperature. The maximum compressed air temperature, according to DIN 51506, is 220 ° C. They are suitable for lower viscosity rotary screw and rotary compressors, but mainly used in rotary compressors. Micos oil compressor is recommended for compressors with a history of excessive oil degradation, poor valve performance, or oil glue forming. They are compatible with all metals used in compressor construction, seal and oil seal materials. Micos oil compressor are not used in air compressors for breathing applications.
The following types of compressors can absolutely work well with Micos oil:
+ Reciprocating air compressor
+ Screw compressors
+ Propeller compressors
+ Valve compressors and centrifuges
+ The air compressor system has main gear and bearings
+ Fixed and mobile compressors
* Note: Currently, Minh Phu company supplies air compressor oil for Micos compressors with high quality, reasonable price and competitive price. For more information, please contact phone number 0919 23 28 26 for advice. Best regards!

INSTRUCTIONS FOR REPLACING OIL COMPRESSOR
During the use of air compressors, users often have to periodically replace oil for the machine. The oil replacement based on the manufacturer's recommendations is very important, making the machine more durable, reducing many problems and contributing to stabilizing the factory's production process. However, it is very important to change the oil to the compressor correctly to avoid risks such as: Oil splash causing burns, etc.

This article helps customers to have many techniques to replace oil for screw air compressors.
1. Press the STOP button.
2. Turn off the power.
3. Make sure that the pressure in the air compressor drops to the same level as the ambient pressure (check if the pressure scale is 0Mpa).
4. Remove the oil tank side door.
5. Remove the additional oil drain hose on the oil tank
6. Place the oil tray under the oil drain valve. Open the oil drain valve. Let the oil drain from the oil tank completely. Close the valve and re-screw the drain valve.
7. Place the oil tank under the oil cooler removal area. Remove the oil cooler. Let the oil drain out. Reassemble the oil cooler.
8. Open the oil tank cover, pour oil into the tank. Fill the oil tank to the level between 2 red lines.
9. Make sure that the removed devices are reinstalled and tightened, and reattach the door and right panel in the original position.
10. Turn on the power. Press START button and stop it after 7 or 8 seconds after that.
11. Check the oil level on the scale of the oil tank. The oil level will be lower because there is little oil circulating in the pipeline and in the oil cooler.
12. Confirm that the pressure drops to the ambient air pressure level. Then disconnect the power supply and add more lubricating oil to the oil filler port.
13. After adding, cover the oil tank carefully and firmly.
Press the START button again to check the oil level when the compressor is full load.
Attention :
- If the oil is no longer viscous, produces a lot of residue or changes color, you will not be able to restore system functions even though the oil cooler, oil tank and oil pipe are cleaned. You may need to replace the oil cooler and overhaul the entire system (including the compressor head).