Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operator safety Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen longevity of mạchine as well as compressor components and ensure operator safety , air compressors are very important to maintain regularly and technically .

Airman air compressors are manufactured by Japanese Hokuetsu Industries. Founded in 1938, it started using the brand name AIRMAN in 1952,. Through over 70 years of development, Airman has achieved great achievements such as ISO14001 environmental standards, ISO 9001 quality management standards....

Micom time setting and troubleshooting of the GRH3 air compressor

Safely using of compressed air tank is a very important issue, compressed air tank before being used must be tested by KTAT, registered for use following regulations. Users must hand over the managing responsibility the compressed air tank to the equipment manager in writing. Operating of thetanks is only given to people from 18 years old or older, who are physically fit and well-trained. They must be assigned by the employer in writing.

Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.