Technology

Compressors equipment maintenance

Compressors equipment maintenance

Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.

Electric wiring and Power Facilities of GRH3 air compressor

Electric wiring and Power Facilities of GRH3 air compressor
How to maintain air dryer?

How to maintain air dryer?

Bảo dưỡng máy sấy khí như thế nào? Kiểm tra xe ống thoát khí, thoát nước hình chữ U có thoát khí nén và nước cứng bình thường không. Hãy dọn dẹp một tháng hơn một lần ống thoát hình chữ U. Kiểm tra xem có bộ phận nối ống nào bị rò rỉ không. Hãy duy trì cách ổn định nhiệt độ bên trong ( dưới 38oC) và nhiệt độ cửa vào khí nén ( dưới 38oC). Đồng thời phải dọn dẹp theo chu kì để bụi, tạp chất không phủ lên tụ điện của bộ làm mát sau và máy sấy khí ( cách khoảng 1-2 tuần)

Maintenence chedule of desicant air dryer (heatless type)

Compressed air system in factory plays an important role. In order to ensure the stable operation during the manufacturing process, the regulary maintenance is nescessary . However, there are many different problems in fact such as: Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduce using time of compressor accessories (air filter, oil filter, oil separator ...). On the other hand, the recommended maintenance in some factories is not seriously followed and there are deviations. To extend the life of the machine as well as compressor components and ensure operator safety Air compressors are very important to maintain regularly and technically correct.Air compressors, dusty air dryers, high engine room temperatures, unsecured wind convection ... lead to reduced use time of compressor accessories (air filter, loc oil, oil separator ...). On the other hand, the maintenance (maintenance) recommended by the manufacturer in some factories is not guaranteed and there are deviated. To lengthen longevity of mạchine as well as compressor components and ensure operator safety , air compressors are very important to maintain regularly and technically .

Some cautions when using GRH3 air compressor

Some cautions when using air compressor. Below are some tips which help to use air compressor durably.
Oil separator for Fusheng SA 75 Air compressor Oil separator for Fusheng SA 75 Air compressor Body diameter: 300 mm, Rim diameter: 355 mm, Height: 305 mm 104 Oil separator 0 đ

  • Oil separator for Fusheng SA 75 Air compressor

  • Post on 28-09-2020 12:23:32 AM - 134 Views
  • Product code: 104
  • Price: Contact
  • Status: Available

Hotline mua hàng

Liên hệ: 024 6294 8282 - 091 923 2826
Thời gian 08h - 17h30 T2 đến T6, Sáng T7 8h - 12h

  • Body diameter: 300 mm, Rim diameter: 355 mm, Height: 305 mm


  • 1. Oil separator for Fusheng SA 75 Air compressor

    Oil separator for Fusheng SA 75 Air compressor is one of three indispensable filters in air compressors. The oil separator is placed in the oil reservoir of the air compressor and separates oil from compressed air before delivering it to the system.

    2. Description of Oil separator for Fusheng SA 75 Air compressor 

    Technical parameters:
    - Dimensions:
    Body diameter: 300 mm
    Rim diameter: 355 mm
    Height: 305 mm
    - Filtration efficiency: 99.9%
    - Life expectancy : 3000h - 4000h
    - Product availability: available product
    - Warranty : 3000h or 06 months

    3. Advantages of Oil separator for Fusheng SA 75 air compressor

    - Good ventilation
    - Special paper material makes the paper folds strong and stable.
    - Effective filtration with high dirt separation ability.
    - Low ability of blocking flow .
    - Long-lasting water resistance.
    - Optimal protection for the engine.
    - Effective fire resistance.

    4. Why you should buy Oil separator for Fusheng SA 75 air compressor at Minh Phu Company

    - We have many years of experience in the field of industrial machine equipment.
    - We always understand your problems, advise you on solutions and choose the best products for you.
    - We are always committed to providing genuine and cost-optimized products to your needs.
    - We deliver the fastest as possibile according to your request.
    - We always accompany and support to guide and protect the product during your use.

    5. Coming to Minh Phu( Phone - Zalo: (+84)819.23.28.29 - (+84)919.23.28.29), customers will be provided with high-quality, reputable, genuine filter products to ensure great and sustainable value to customers. We always take the Quality of Goods and Service as the foundation for the company's sustainable development!


     
    Products in this Category
    Oil separator for Atlas Copco GA 45 Air compressor

    Oil separator for Atlas Copco GA 45 Air...

    - Dimensions: Rim diameter: 300 mm, Body diameter: 167 mm, Inner diameter: 230 mm

    Price: Contact

    Oil separator for Atlas Copco GA 75+ Air compressor

    Oil separator for Atlas Copco GA 75+ Air...

    - Dimensions: Rim diameter: 400 mm, Body diameter: 240 mm, Height: 300 mm

    Price: Contact

    Oil separator Atlas Copco GA 11 air compressor

    Oil separator Atlas Copco GA 11 air...

    Rim diameter: 240 mm, Body diameter: 130 mm, Inner diameter: 75 mm

    Price: Contact

    Oil separator for Atlas Copco 160 air compressor

    Oil separator for Atlas Copco 160 air...

    Body diameter:350 mm, Rim diameter:597 mm, Height:350 mm

    Price: Contact

    Oil separator for Fusheng 37kw air compressor

    Oil separator for Fusheng 37kw air...

    Body diameter: 136 mm, Inner diameter of the gasket: 100 mm, Outer diameter of the gasket: 111 mm, G: M 39 X 1.5, Height: 302 mm

    Price: Contact

    Oil separator for Fusheng 55 kw air compressor

    Oil separator for Fusheng 55 kw air...

    Body diameter: 300 mm, Rim diameter: 355 mm, Height: 305 mm

    Price: Contact

    Oil separator for Mitsuiseiki 37kw air compressor

    Oil separator for Mitsuiseiki 37kw air...

    Inner diameter: 75 mm, Outer diameter: 115mm, Height: 445 mm

    Price: Contact

    Oil separator for Swan 37kw air compressor

    Oil separator for Swan 37kw air...

    Body diameter: 136 mm,Outer gasket diameter: 111 mm,Inner gasket diameter: 100 mm,Height: 302 mm

    Price: Contact