Technology

How to find the causes and repair water chiller

27/12/2018

In the process of operation and use of air conditioners in general and chillers in particular, there are many incidents that make users face with many difficulties. In this article we provide readers with the most basic knowledge to determine the causes, phenomena and remedies when air conditioning (chiller) is in trouble.To help you deal with problems during the machine operation and use, we would like to introduce some of the following common problems:

Compressors equipment maintenance

21/12/2018

Each compressor requires well-timed service. Under the service means change the oil, replacement of the oil and air filter, separator, check the belt tension (if it is not the compressor with direct drive), lubrication of the bearings, different type of the valve checking, replacement of the valves if necessary. Also according to the operational manual it is necessary to replace inlet valve repairing kit, minimum pressure valve, thermostat valve and return valve.

Swan TS-V air compressor

28/12/2018

Swan TS-V airr compressor series is a series of machines using inverter to reduce power consumption and have outstanding features of the Swan TS series. Based on operating phenomena to optimize operation, ensure maximum air volume and minimum power consumption, average electricity savings at: 15% - 30%. Protection and advanced control system improved reliability of safe and enhanced operating performance; Air compressor starts at zero speed, extending the machine's durability.

Location for installation of Hansome II air compressor

30/07/2019

Location for installationis very important to the compressor system. Proper place can avoid some bad affects from environment, improve the efficiency as well as lengthen the life of the machine. Following are some cautions which must be highly considerable to ensure the durable operation.

Maintanance of Korean Micos 75 air compressor

19/08/2019

Air compressor maintenance is the entire job of cleaning the compressor and replacing consumable parts after a certain running time (3000hr or 6000hr) to keep the performance of the machine in the best state. . Checking the machine parameters must be within the allowable limits. Standard maintenance extends the life of the device and does not interrupt the operation of the machine. Minh Phu Machinery and Egineering Services Co., Ltd specializes in supplying spare parts,repairing and maintaining screw air compressors. Below are some photos of maintenance of Micos 75 Air Compressor - Korean Yujin that Minh Phu carried out.

Oil separator for Kobelco HM 37A air compressor
Post on 31-08-2020 05:37:36 AM - 131 Views
Product code: 71
Price: Contact
Status: Available

Rim diameter: 108mm, Body diameter: 70mm, Height H: 336mm

Oil separator for Atlas Copco GA 45 Air compressor

- Dimensions: Rim diameter: 300 mm, Body diameter: 167 mm, Inner diameter:...

Air filter for Atlas Copco GA 45 Air compressor

- Dimensions: Inner diameter: 100 mm, Outer diameter: 160 mm, Height: 372...

Oil separator for Atlas Copco GA 75+ Air compressor

- Dimensions: Rim diameter: 400 mm, Body diameter: 240 mm, Height: 300 mm

Oil filter for Atlas Copco GA 75+ Air compressor

Body diameter: 93 mm, Inner gasket diameter: 62 mm, Outer gasket diameter: 71 mm, Height:...

Air filter for Atlas Copco GA 75+ air compressor

- Dimensions: Outer diameter: 220 mm, Body diameter: 124 mm, Height: 404 mm

Oil separator Atlas Copco GA 11 air compressor

Rim diameter: 240 mm, Body diameter: 130 mm, Inner diameter: 75 mm

Oil filter for Atlas Copco GA 11 air compressor

Body diameter: 93 mm, Inner gasket diameter: 62 mm, Outer gasket diameter: 71 mm, Height:...

Air filter for Atlas Copco GA 11 air compressor

Body diameter (A): 118 mm, Outer diameter (B): 67 mm, Outer diameter (C): 67 mm, Height...

Oil separator for Atlas Copco 160 air compressor

Body diameter:350 mm, Rim diameter:597 mm, Height:350 mm

Air filter for Atlas Copco 160 air compressor

Body diameter: 350 mm, Height: 340 mm, Tâm giữa 2 gioăng: 325 mm

Oil separator for Fusheng SA 75 Air compressor

Body diameter: 300 mm, Rim diameter: 355 mm, Height: 305 mm

Oil separator for Fusheng 37kw air compressor

Body diameter: 136 mm, Inner diameter of the gasket: 100 mm, Outer diameter of...

Chi tiết sản phẩm

1. Oil separator for Kobelco HM 37A air compressor

The oil separator for Kobelco HM37A air compressor is one of three indispensable filters in air compressors. The oil separator is placed in the oil reservoir of the air compressor and separates oil from compressed air before delivering it to the system.

2. Product description

Technical parameters:
- Dimensions:
Rim diameter: 108mm
Body diameter: 70mm
Height H: 336mm
- Filtration efficiency: 99.9%
- Life expectancy : 3000h - 4000h
- Product availability: available
- Warranty : 3000h or 06 months

3. Advantages of oil separator for Kobelco HM37A air compressor

- Good ventilation
- Special paper material makes the paper folds strong and stable.
- Effective filtration with high dirt separation ability.
- Low ability of blocking flow .
- Long-lasting water resistance.
- Optimal protection for the engine.
- Effective fire resistance.

4. Why you should buy Oil separator for Kobelco HM37A air compressor at Minh Phu Company

- We have many years of experience in the field of industrial machine equipment.
- We always understand your problems, advise you on solutions and choose the best products for you.
- We are always committed to providing genuine and cost-optimized products to your needs.
- We deliver the fastest as possibile according to your request.
- We always accompany and support to guide and protect the product during your use.