The water trap is an important element of air compressors to purify the compressed air stream, separate water and dirt from the compressed air, and protect the system.
The SAMG 850 water trap separates water from compressed air, purifies the water vapor and dust in the air, removes upto 99% the water amount in the inlet and outlet areas of the air compressor.
The SAMG 650 water trap separates water from compressed air, purifies the water vapor and dust in the air, removes upto 99% the water amount in the inlet and outlet areas of the air compressor.
The SAMG 550 water trap separates water from compressed air, filters the water vapor and dust in the compressed air, removes upto 99% the water amount in the inlet and outlet areas of the air compressor.
The SAMG 450 water trap separates water from compressed air, purifies the water vapor and dust in the compressed air, removes upto 99% the water amount in the inlet and outlet areas of the air compressor.
The SAMG 350 water trap separates water from compressed air, purifies the water vapor and dust in the compressed air, removes upto 99% the water amount in the inlet and outlet areas of the air compressor.
The SAMG 250 water trap separates water from compressed air, purifies the water vapor and dust in the compressed air, removes upto 99% the water amount in the inlet and outlet areas of the air compressor.
The SAMG 150 water trap separates water from compressed air, purifies the water vapor and dust in the compressed air, removes upto 99% the water amount in the inlet and outlet areas of the air compressor.
The desiccant is spherical, white, odorless, tasteless, nontoxic and insoluble in water and alcohol. It is resistant to thermal shock and abrasion with high mechanical strength and strongly absorbs moisture (draining). The desiccant particle does not expand or crack after absorbing water.
Air compressor maintenance is the entire job of cleaning the compressor and replacing consumable parts after a certain running time (3000hr or 6000hr) to keep the performance of the machine in the best state. . Checking the machine parameters must be within the allowable limits. Standard maintenance extends the life of the device and does not interrupt the operation of the machine. Minh Phu Machinery and Egineering Services Co., Ltd specializes in supplying spare parts,repairing and maintaining screw air compressors. Below are some photos of maintenance of Micos 75 Air Compressor - Korean Yujin that Minh Phu carried out.
Minh Phu Machine and Technical Services Co., Ltd specializes in providing consulting, repair and maintenance services of Kobelco Japanese air compressors.Moreover, Minh Phu also provides Kobelco parts: compressor oil, oil separator, oil filter, air filter, bearings, solenoid ...
Atmospheric air always contains moisture: the higher temperature, the higher humidity is typical for the air. However, when compressed air is accumulated moisture, the water is condensing on the internal parts of the equipment and pneumatic systems. It is the case of corrosion and reduce the equipment lifetime. Therefore usually the additional air treatment equipment, like air dryer are used to avoid the accumulation of moisture in the pneumatic system.
The compressor can be operated remotely with the LOCAL/REM selector switch on the meter panel. For the remote operation, the following wiring work is required. Before wiring, be sure to turn off the main power and make sure that no electric power is supplied to the compressor.
Activated alumina/Desiccant beads have a white, spherical, non-toxic, odorless, insoluble in water and alcohol. They are able to stand out thermal shock and abrasion with highly mechanical stability and strong absorption (impervious). The particle shape does not expand or crack after absorbing.
Bảo dưỡng máy sấy khí như thế nào? Kiểm tra xe ống thoát khí, thoát nước hình chữ U có thoát khí nén và nước cứng bình thường không. Hãy dọn dẹp một tháng hơn một lần ống thoát hình chữ U. Kiểm tra xem có bộ phận nối ống nào bị rò rỉ không. Hãy duy trì cách ổn định nhiệt độ bên trong ( dưới 38oC) và nhiệt độ cửa vào khí nén ( dưới 38oC). Đồng thời phải dọn dẹp theo chu kì để bụi, tạp chất không phủ lên tụ điện của bộ làm mát sau và máy sấy khí ( cách khoảng 1-2 tuần)
